Click image to view full size image
Product Description
This kind of Philips LED Street Light adopts high-quality imported LED light-emitting chip, and directly encapsulates the chip on the top of the nut of the metal bolt, then the LED metal bolt is directly screwed on the aluminum heat sink, which greatly improves the heat conduction efficiency between LED and aluminum radiator so as to prolong the service life of the LED light source. In addition, the light source adopts modular design to achieve the best match between ground illumination and power. By increasing or decreasing the number of light sources, it can meet different road width and illumination requirements, which not only meets the lighting requirements but also saves energy. The Philips LED Street Light is mainly used in road lighting such as trunk roads, secondary trunk roads, branch roads, factories, schools, gardens, city squares, courtyards, etc.
No |
Item |
Picture |
Parameters |
1 |
Led street light |
|
Power:100w |
2 |
Solar Panels |
|
Power:2pcs*120w |
3 |
Battery |
|
Capacity:2pcs*120AH |
4 |
Burried Battery Box |
|
Material: Plastics |
5 |
Solar Controller |
|
Rated Current:20A |
6 |
Light Pole |
|
Height:8m ; |
7 |
Anchor bolt |
|
4M15-500mm |
8 |
Rvv 2*2.5^2 Cables |
15m |
|
9 |
Working time:6 hrs full power /6hours half power , |
||
Working time |
6HOURS full power+6HOURS half power |
||
Backup of battery |
1 days(working for 2 days) |
||
Process of pole |
Hot galvanized and powder coating |
||
Process of anchor bolt |
Raw material Q235B |
||
http://www.hrsolarlights.com/
E-mail: 